- Home
- Product Information
- SUMICERAM®
- SUMICERAM®-S -Heat resistant adhesives-
SUMICERAM®-S / BOND-X has a high heat resistance and maintains high adhesion at a temperature over 1000°C.
- It is a water based single component type and easy to handle.
- It cures at low temperature (100°C - 300°C).
- The bonded layer after curing, becomes ceramic-like and it excels in hardness
- It excel in heat-resistance, chemical-resistance and water-proof.
- It bonds strongly almost all types of inorganic materials such as ceramics, glass and metals.
| SUMICERAM® | BOND-X | ||
|---|---|---|---|
| S-10 series | S-30 series | 70, 80 series | |
| pH | Weak alkaline | Weak alkaline | Weak alkaline |
| Main composition |
Silica Alumina |
Silica Alumina Zircon |
－ |
| Cure temp. | 100-150°C | 100-150°C | 100-150°C |
| Features | Water resistance, Good fluidity, Good continuous filling |
Water resistance, Fast curing, (Low bubbling) |
High adhesion |
| Application |
Halogen lamp and HID, DPF bonding |
Halogen lamp and HID, Temp. sensor |
Halogen lamp and HID, Temp. sensor |
| Attention | Easy to dry | Easy to dry | Easy to dry |
| Shelf life | 3 months | 3 months | 4 months |
Properties and characteristics after curing of SUMICERUM®-S / BOND-X series
| Properties | Characteristics after curing | |||||
|---|---|---|---|---|---|---|
| Main ingredient | Viscosity (mPa. s) |
Heatproof temp (max.°C) |
Heat expansion coefficient (x10-7°C) |
Specific electric resistance (MΩcm) |
Adhesive strength (kg/cm2) |
|
| S-10A | Silica, Alumina | 50,000 | 1,600 | 40 | 5 | 15 |
| S-10B-3 | Silica, Alumina | 25,000 | 1,600 | 70 | 5 | 15 |
| S-30A-40 | Silica, Alumina | 18,000 | 1,200 | 40 | 10 | 15 |
| S-31A | Silica, Alumina | 8,000 | 1,200 | 40 | 10 | 15 |
| BX-70M | Silica, Alumina | 25,000 | 1,400 | 150 | 5 | 30 |
| BX-72 | Silica, Alumina | 46,000 | 1,400 | 115 | 100 | 40 |
| BX-78A RM-390A |
Silica, Alumina | 25,000 | 1,600 | 110 | 2,000 | 30 |
| BX-78Z | Silica, Alumina | 20,000 | 1,200 | 80 | 2,000 | 60 |
| BX-80W | Silica, Alumina | 30,000 | 1,400 | 120 | 3 | 40 |
| BX-83 | Silica, Alumina, Zircon |
66,000 | 1,400 | 100 | 40 | 60 |
* We have a wide variety of grades of SUMICERAM®-S / BOND-X with different viscosity and thermal expansion coefficient.
Precaution
- Premixing before use :
Thoroughly premix the SUMICERAM®-S / BOND-X to make it into uniform paste before use.
When the SUMICERAM®-S / BOND-X has too high viscosity to use, please dilute it with small amount water. - Shelf life :
Each type of SUMICERAM®-S / BOND-X has its own usable period (shelf life). - Wearing protective equipment :
Please wear proper protective equipment such as goggles and glove. - Degreasing materials :
Thoroughly degrease the surface of materials to be bonded.
Storage condition
Please store the product in the fridge (5-10°C) or in the cool and dark place (25°C). When SUMICERAM®-S / BOND-X is exposed in high temperature the shelf life will be shorted. Avoid freezing (<5°C ) because it does not work well.
Attention
- Less flexibility, and it does not use for the purpose of flexibility and impact resistance.
- No airtight.
- Cannot apply to the resin materials.
We would like to select the best grade and set up the using conditions for your purpose.